WHAT’S NEW:

BASCHMANN SERVICES INC. IS PLEASED TO ANNOUNCE THE ADDITION OF PSI (PAVEMENT SERVICES INC.) TO OUR LINE UP OF EXCELLENT CONSTRUCTION EQUIPMENT. PSI IS A LEADING PRODUCER OF SMALL TO MID SIZE HYDROSTATIC MOTOR GRADERS.

STARTING WITH THE M413XT MAINTAINER, WITH 133HP ENGINE, 13,800LB. OPERATING WEIGHT, 10’ X 19” MOLDBOARD, 84” ¾ YD FRONT BUCKET WITH UNIVERSAL SKID STEER COUPLER AND AUXILLARY HYDRAULICS, AVAILABLE REAR SCARIFIER, HYDROSTATIC ALL WHEEL DRIVE AND MORE!

NEXT THE MG618, 6 WHEEL 133HP, 18,100 OPERATING WEIGHT, 10’ X 19” MOLDBOARD, 84” FRONT SCARIFIER MOUNTED ON A UNIVERSAL SKID STEER COUPLER, 10’ X 19” MOLDBOARD (OPTIONAL 12’ MOLDBOARD), CENTER ARTICULATION, WHEEL LEAN, THREE GRADING MODES, OPTIONAL TOPCON LAZER SYSTEM AND MANY MORE FEATURES OF LARGER GRADERS WITH THE CONVENIENCE AND VERSATILITY OF A SMALLER UNIT.

THE LATEST EDITION IS THE MG622 DESIGNED TO FIT IN THE 22,000LB. CATEGORY REPLACING MACHINES LIKE THE JOHN DEERE 570. THIS UNIT OFFERS A 133HP ENGINE, 12’ MOLDBOARD, CENTER ARTICULATION, WHEEL LEAN, STANDARD TANDEM HYDROSTATIC DRIVE, (OPTIONAL ALL WHEEL DRIVE), ELECTRONIC TRACTION CONTROL, TWO GRADING MODES, OPTIONAL TOPCON LAZER SYSTEM AND MANY MORE FEATURES OF LARGER GRADERS WITH THE CONVENIENCE AND VERSATILITY OF A SMALLER UNIT.

STOP BY AND TAKE A LOOK AT THESE FINE PSI PRODUCTS AND WATCH FOR THE ADDITION OF TAC COAT SPRAYERS AND MORE FROM PSI.

BASCHMANN SERVICES INC. IS ALSO PLEASED TO ANNOUNCE THE ADDITION OF ASV POSI TRAC, ALL SEASONS VEHICLE, TRACK LOADERS TO OUR LINE UP OF EXCELLENT CONSTRUCTION EQUIPMENT.

ASV IS KNOWN FOR THIER ADVANCED DESIGN AND MANUFACTURE OF RUBBER TRACK LOADERS FEATURING EXTREAMLY LOW GROUND PRESSURE COMBINED WITH HIGH TRACTIVE EFFORT. THESE FEATURES ALLOW USERS TO INCREASE PRODUCTIVITY AND PROFITABILITY IN ALL CONDITIONS, FROM TOUGH CONSTRUCTION SITES TO SENSITIVE LANDSCAPING.

ASV IS CURRENTLY PRODUCING THREE MODELS

THE RC 30 IS AN EXCELLENT LANDSCAPERS TOOL AS WEEL AS A CAPABLE LOADER AND MULTI PURPOSE CARRIER.

FEATURING A 31.5HP CATERPILLAR ENGINE AND USING 11” WIDE RUBBER TRACKS THAT CREATE JUST 2.5PSI OF GROUND PRESSURE AND A 46.5” OVERALL WIDTH AS WELL AS A 10GPM AUXILLIARY CIRCUIT THIS MACHINE CAN GO VIRTUALLY ANYPLACE AND DO ANYTHING THAT YOU ASK OF IT.

 THE 50 SERIES IS A MIDSIZE MACHINE FEATURING A CATERPILLAR 50HP ENGINE IN THE RC50 OR A PERKINS 50HP ENGINE IN THE R50. THE R50 USES “CASE” STYLE CONTROLS WHILE THE RC50 USES THE PILOT OPERATED CAT STYLE CONTROL. BOTH MODELS HAVE A 16.3GPM AUILIARY HYDRAULIC CIRCUIT, 115” HINGE PIN HEIGHT, 2.7PSI OF GROUND PRESSURE, 12” GROUND CLEARENCE, 3,000LB TIPPING LOAD, UNIVERSAL QUICK COUPLER AND MORE!  

 

NEW RC100 HIGH FLOW HIGH SPEED AND HIGH LIFT!

THIS MODEL PROVIDES THE OPERATOR WITH A 99.5HP LOW 

EMISSIONS CATERPILLAR 3054C PRODUCING 304FT.LBS. OF TORQUE. THE RC100 ALSO PROVIDES 20GPM LOW FLOW CIRCUIT AND AN ASTONISHING 38GPM ON THE HIGH FLOW CIRCUIT. THE RC100 HAS A TWO SPEED TRAVEL SYSTEM WITH A TOP SPEED OF 10 MPH! WITH IT’S 18” WIDE RUBBER TRACKS THE RC100 EXERTS JUST 3.8PSI OF GROUND PRESSURE DESPITE IT’S 10,150LB OPERATING WEIGHT, ALLOWING YOU TO GET THE JOB DONE. THE RC100 ALSO PROVIDES 7600LB TIPPING LOAD AND A 125” LIFT HEIGHT. THIS MACHINE DOES IT ALL!

 

STOP BY AND TAKE ONE OF THESE IMPRESSIVE MODELS FOR A TEST DRIVE, WE THINK YOU WILL BE IMPRESSED AND YOUR NEXT SKID STEER MIGHT NOT BE A SKID STEER! 

Baschmann Services Inc. is pleased to announce the expansion of our Elma N.Y. facility. The 5,000 square foot addition includes approximately 3,000 Sqft of parts department, including a retail area stocked with the everyday needs of our customers. The remainder of the addition provides much needed office space. Baschmann Services is committed to providing quality services for our customers, by creating this new space we feel we have improved our ability to better serve you, our customers. Please stop by to take a look at our progress!

 

Baschmann Services Inc. is pleased to welcome Bill Willson Parts & Product Support, to our family. Bill brings with him over twenty years of experience in the construction industry parts business. Bill has experience with most major manufacturers in the industry and is a specialist in locating alternative parts, both new and used, for various manufactures.